In nearly all cases, most people spend quite a bit of money buying their lift truck. Therefore, it is extremely essential to take good care of it so as to protect your investment well into the long run. It is a great idea to know the procedures which are undertaken in taking care of and maintaining this machinery.
By starting up the forklift and listening carefully how it works is among the best ways to tell how good the engine is working. For instance, if there are any knocks or misses, the machinery is faulty and this must raise several issues. Additionally listen closely for any squealing sounds that come from the belts because these sounds will provide you with a wealth of information.
When carrying out maintenance, several of the main parts you would need to pay attention to comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty components or burnt out light bulbs have to be replaced as soon as they are noticed. It is also vital to check the wiring.
After the above parts have been inspected carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each battery cell has to be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The hydraulic filter, the transmission filter and the fuel filters need to be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change has been done and new filters have been fitted, visually inspect the drive axle from underneath the machinery. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Next, inspect each and every other component of the equipment like the wheels. If any kind of problem or fault is detected, be sure to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.