In the latter part of the 1990's, a Nissan Propane Forklift would have cost approximately $11,000 to $14,000 to buy a brand new one. You are now able to buy a second-hand model with this amount, with fewer than 5,000 operating hours and has approximately 15 feet of lifting capacity and cushion tires. However, a used Nissan forklift truck that has less than 5,000 hours can be found for less than $7,000. This option might be a little bit of an older unit than several others, but remember; everything revolves around the operating hours. A model such as this will probably have a fairly good load capacity of around 5,000 pounds.
A brand new Nissan forklift, dating from 2005 to the current year, can be found for about $10,000. Usually, these models will have a regular lift capacity ranging from 4,000 to 5,000 lbs. Normally, a model like this will run smoothly and have cushion tires. Of course, newer units normally run smoother than older ones.
Kinds of Forklifts
Generally, forklifts are categorized in 2 specific ways: by the kind of fuel it takes and the structure of the lift truck. Based on structure, the following types of lift trucks are amongst the most common:
Standard Forklift: Standard forklifts consist of the familiar warehouse lift truck. These types of lift trucks offer a lifting capacity of 3,000 to 5,000 pounds. They have a height capacity of about 20 feet.
Reach Forklift: Usually known as a narrow aisle lift truck, the reach lift truck is the type of machinery which is found within warehouses and distribution centers where space is at a premium. Narrow construction means that it can not carry as much as a standard lift truck model, however, it has an extendable mast which can easily lift loads approximately 40 feet.
Telescopic Forklift: The telescopic forklift is also referred to as a telehandler, or an extendable reach forklifts or sometimes even a telescopic handler. These equipment are more heavy duty and more rugged compared to the traditional forklift. These models offer a telescopic boom which could be extended out and raised up. Usually, these units are used on rough terrain. They could handle loads up to 70 feet high and can move loads weighing over 30,000 lbs. handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most usually utilized to perform tasks on rough terrain. These kinds of forklifts are only capable of transporting loads vertically, not like a telescopic model. These units can raise loads up to 12,000 lbs, while reaching a height of 10 to 30 feet.
|
|
